Model #115 shown with curved extensions #115 Specs
- No cutting required to install.
- This header was designed to be used in conjunction with
side pipes.
- Slipover tailpipes with turnouts available in two designs:
Short (exit at door, approx 28") $145 per pair
Long (exit in front of rear wheel, approx 41") $150 per pair
- Slipover tailpipes have 1.5" of swedge in addition to the length shown.
- Can be used with factory sidepipes on
63 to 81 Corvettes .
- If using factory sidepipes, order header with straight extensions and fabricate the
turn into the sidepipes.
- If using a high port after market cylinder head, a stepped header is required.
- Power steering = OK
- Factory Air Conditioning = NO
- On '63 - '67: Cannot use factory
rocker panel molding.
|
Model #115 63-81 SB Corvette Stingray Side exit
Prices include straight extensions
(add $170 for curved extensions)
| Size |
|
|
Price |
| 1-5/8" |
Assembled |
With standard
flanges |
$910.00 |
| 1-3/4" |
Assembled |
With standard
flanges |
$910.00 |
| 1-3/4" |
Assembled |
With adapter
flanges |
$1010.00 |
| 1-7/8" |
Assembled |
With adapter
flanges |
$1010.00 |
| 2" |
Assembled |
With adapter
flanges |
$1020.00 |
| Step combinations
of 2 sizes above |
Required for high
port heads |
Add |
$200.00 |
| Any Size listed
above |
Partially Assembled
with weld-on collectors |
Deduct |
($300.00) |
| Any Size listed
above |
Assembled with
curved extension |
Add |
$190.00 |
| This
Page Last Updated
08/27/08 15:04
|
|
Features, Options & Policies |
| Back
Home |
|