Dyno Parts and Sources
Flow Rators--order only 600 mm Laboratory type w/dual scales. I suggest a 100#/hr to 1000#/hr which will cover you for a min of 200 HP gasoline/100hp methanol up to 2000hp gasoline/825HP methanol.
Emerson Process Management / Brooks Instrument
Princo Instruments Inc.
90 deg. x 8" / 10"elbows.
H-P Products, Inc.
Robertshaw Controls Co.
Pressure & Temp Gauges
H.O. Trerice Co.
3690 N.W. 53 Street
Fort Lauderdale, FL 33309
Carb Air Hose
Keystone Rubber Corp.
Air powered gasoline/diesel fuel transfer pump. #AP-30
Charles Products Co.
Immersion Heaters Suitable for Oil. Do not use copper sheath, must use steel sheath rated for oil or stainless steel sheath. Most are specifically "Oil Immersion Heaters" and use an "O" suffix. Many other shapes and sizes are available.
#CSO-12 12" - 1500W 120 or 240 VAC 2" NPT
Emerson Electric Company
Chromalox Heaters are available through:
Ogden Manufacturing Co.
Derated Metal Over-The-Side Heaters:
Process Technology, Inc.
#OP 1217 1000W 240V 17"
Hot water heater thermostat from Grainger:
Open on rise range - 110-170F
Flexible Etched Foil Heaters. (For dry sump tanks.):
Watlow Electric Mfg.
Air Supply & Venilation
(All Grainger part #'s.)
1 Carb air blower - kit - 7C664
(Substitute motor #5K556 to get 2-spd capability). Blower # is 2C977.
2 Cell air blowers - 7C824 - 12 5/8"
width. (Substitute to get a 2 spd motor 1/2 hp #5K556. (Blower is # 2c988)
Low speed 1450 cfm free air.
2 Exhaust fans - 7C528 - 110V - 16"
2 Fan shutters for cell inlet blowers
5 2x605 two speed switches for cell/carb blowers & exhaust fans. (for Split phase/permanent split capacitor motors.
The air flow ratings are only valid in a normal environment. Due to this system both pushing in and pulling out air, the air flow movement is greater than the ratings.
1 1-1/2" 90-o ball valve - plumbing supply or hydraulic place?
1 Parker Hannifin Manatrol F-1200-S needle flow control valve 3/4" (hydraulic supply house)
1 Sump Pump - Graingers - 3P530
1 1P 747 water filter with 1P 750
cartridge in sump pump circuit to filter return water.
1 5 HP Pump min - 7-1/2 to 10 hp better for Stuska.
Home Headers & Kits Exhaust Parts Roller Cams Software Tech Data About Us